3
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not
be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for
result in a hazardous situation.
4) POWER TOOL USE AND CARE
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can get caught in moving parts
g) lf devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
ensure that the safety of the power tool is maintained.
5) SERVICE
This tool is designed to be used as a
polisher
. Read all the
warnings, instructions and indications
provided on drawings and
to comply
with all the instructions provided
injuries.
This tool is not intended to be used for metal
brushing and cutting operations. The use of
this tool for unintended applications may cause
hazards and injuries to people.
The tool must be used with accessories that have
tool does not guarantee a safe operation; read
the following additional instructions.
The rated speed of the accessories must be
at least equivalent to the maximum speed
speeds above the rated one, may cause them to
break or be projected into the air.
5. The external diameter and thickness of the
the tooI. Accessories with incorrect dimensions
cannot be adequately protected or controlled.
the tooI. The use of accessories that cannot
imbalance, excessive vibrations and loss of
control of the tool.
7. Do not use damaged accessories. Before
use, inspect all the accessories. Inspect the
supporting pads and verify there are no cracks,
tears or excessive wear. If the tool or accessory
ADDITIONAL SAFETY INSTRUCTIONS
