Installation / Assembly
dizzer L 55 vertical modules
– Assembly Instructions
Page 32 of 45
© inge GmbH
45-D02229-en, Rev. 2
5.5
Installation of dizzer
®
L 55 vertical modules in Conventional Racks
NOTE
CAUTION, PROPERTY DAMAGE!
Sufficient stability and building-side attachment of the dizzer
®
L 55
vertical modules must be guaranteed. The brackets must connect
the module to the module rack tightly, tension-free and vibration-
free.
NOTE
For proper installation of the dizzer
®
L 55 vertical modules in
conventional racks, heed correct orientation of the module
connections.
Step
Activity
Figure
1
Prepare the end cap
a)
Check the individual parts of the end caps.
The scope of delivery of the Connecting kit includes two
end caps with central connector (O-Rings preassembled)
and composite coupling (3 x 2.5
” / 2 x 8”).
b)
Carefully remove the tape and the yellow protecting cap
from the top module end. Avoid the use of any sharp
instrument that might cause damage to the module.
