EWM-BUS-DD/10
80946/118 ETM
Duplomatic MS
▪ EWM-BUS-DD/10 Start-up Manual – 80946/118 ETM --- Oct 2018
|
5
Characteristics
This card is a Profibus/CANbus coupler for systems up to 24 axes.
It allows the data exchange between a CAN network and PROFIBUS PLC, through a built
-in
interface inside one housing.
The EWM-BUS-DD, combined with cards for axes control like EWM-SS-DAD (catalogue 89460),
allows to design synchronization systems with CAN communication on the axes network side, and
with PROFIBUS communication on PLC side.
7-segment display makes diagnosis and commissioning easier.
Configure the CAN communication by DIL-switches. For PROFIBUS setting, load the .GSD file
(www.duplomatic.com, inside download section.)
Power supply
VDC 24
Current consumption
mA
< 120 (a 24 V)
Connections
PROFIBUS: D-sub 9-pin CAN: 4-pin COMBICON plug
Insulation voltage
≥ 500 V
Baud rates
9,6 Kbaud to 12000 Kbaud, automatic recognition
CAN baud rates
125 Kbaud, 250 Kbaud, 500 Kbaud, 1 Mbaud
DP function
imaging of the CAN Data as I/O data of the PROFIBUS complete
diagnosis and configuration via DP master
Profibus interface
according to DIN 19245 part 1-3
Housing material
Plastic
Dimensions
mm 120 x 99(h) x 25(w)
Connectors
2x4 poles screw terminals - PE direct via DIN rail
Operating
temperature range
°C
0 / +55
Protection degree
IP 20 housing
