manualshive.com logo in svg

Duplo INSTRUCTION MANUAL, Инструкция по эксплуатации


Поделиться
Скачать
background image

24

5. PREPARING FOR OPERATION

❊

 Size change

Press the [Size Change key] for more than one second to
change the size.
When size change completes, a beep sounds.

Note

Note

This machine moves left and right.

❊

 Adjustments using the step mode <Fine adjustment menu>

After changing the size, perform fine adjustments of each function in the step mode.
When the step mode completes, the newly adjusted value is saved as the new setting of the memory number.
Load actually bound paper into the upstream unit, and prepare to start adjustments.

Note

Note

Values shown in the Main Menu screen are replaced by values adjusted not only in the fine adjustment screen but also
in the step mode. However, the values shown in the setting screens of each Memory Number will remain the same.
They show values originally entered.

 Starting the step mode

When the DBM-500T is connected, select whether to trim
sets bound in the step mode using the [Trim On/Off key].

On: Trims. Set to trim booklets.
Off: No trimming. Set to check stitching and folding

positions.

The setting of the [Trim On/Off key] has priority during
the step mode, regardless of whether trimming has been
set or not at the memory number used.

Pressing the [Step Mode key] in the fine adjustment
menu proceeds to the <Stitcher Adjustment> screen.

00000

01

420. 0

x

297 . 0

207. 0

x

277 . 0

Size change key

<Main Menu> Screen

MAINMENU

ADJUST

OPTION

ACCESSOR

Perform paper size change

Step Mode key

Trim On/Off key

<Fine Adjustment Menu> Screen

<Stitcher Adjustment> Screen

MAINMENU

ADJUST

OPTION

ACCESSOR

Содержание INSTRUCTION MANUAL























































































Отзывы:

Нет отзывов

Похожие инструкции для INSTRUCTION MANUAL

MBM SPRINT 3000 Operation Manual preview
SPRINT 3000
Бренд: MBM Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды