Duplo DUPRINTER DP-330e Скачать руководство пользователя страница 6

Страница: 6 / 141

Notes on Safety (Please Read and Observe)

Do not modify the machine.

Doing so may result in fire or electric shock.

Do not remove the rear lid, cabinet, or covers from the machine.

The inside of the machine contains high-voltage parts, which may cause

electric shock.

WARNING

Prohibition of Disassembly or Modification

Do not place the machine in a humid or dusty area.

Doing so may result in fire or electric shock.

Once the machine is in position, secure in place using the casters.

If the machine falls over, this could result in personal injury.

Caution for Location

Before moving the machine, remove the power plug from the outlet.

If the cord is damaged, this may result in fire or electric shock.

Do not place the machine in an unstable position, such as on an

unsteady support or sloping area.

If the machine is dropped or falls over, this could result in personal injury.

WARNING

CAUTION

Do not place the machine in a place subject to direct sunlight or heating

equipment such as a stove.

It may degrade ink quality and affect printing. The machine also may malfunction.

Avoid placing the machine in a place subject to high or low temperature

or high humidity.

The paper absorbs moisture and it may cause paper jam or wrinkles.

Содержание DUPRINTER DP-330e














































































































































Результаты поиска

Содержание DUPRINTER DP-330e

Отзывы:

Бренды по названию

Популярные бренды

Duplo DUPRINTER DP-330e, Инструкция по эксплуатации

Результаты поиска

Содержание DUPRINTER DP-330e

Отзывы:

Бренды по названию

Популярные бренды