Copyright © 2019 Duplo Corporation All Rights Reserved
2
1. Installation Precautions
1-1. Before installation
• Check that before the installation, the power switch [A] is turned off.
• Check that the voltage and frequency of the area in which this machine is used match the specifications
on the label [B] pasted on the machine.
• When removing the machine from the container, lift the bottom [C] of the machine at two people.
[A]
[B]
[C]:
• A machine in the photos shown in this manual is a prototype. The colors and forms of the parts shown in
the photos may be different from those of the production model.
1-2. Installation location
• Install the machine on strong solid ground which can bear the weight of the machine. The weight of the
machine is as follows.
DF-999/DF-999A : 43.0 kg/94.8 lb (This unit: 41.6 kg/91.8 lb, Accessories: 1.0 kg/2.2 lb)
DF-990/DF-990A : 42.0 kg/92.6 lb (This unit: 40.6 kg/89.6 lb, Accessories: 1.0 kg/2.2 lb)
(W)
(H)
(D)
• The following installation space(
width x
depth x
height)is required.
1,112 x 512 x 554 mm/43.78 x 20.16 x 21.82 inches
• Install the machine in a flat and stable place.
• Do not install this machine near a heating equipment such
as a stove.
• Install in a place which meets the following requirements.
Temperature range: 5 to 35ºC, 41 to 95ºF
Humidity range: 20 to 80%RH (No condensation)
No direct sunlight
Outside light does not exceed 1,500 lx
Little dusts and dirt
Little vibrations
No salt
No special chemicals
No exposure to water
1-3. Power supply
• Make sure the power supply used is always within the following range.
Power supply: 100 to 240 V, 50/60 Hz
• When you power other appliances from the same wall outlet, make sure that the combined power
consumption does not exceed the power supply capacity.
Rated power: 100 W
Rated current: 1.0 A to 0.5 A
1. Installation Precautions
