19
7. OPERATION PROCEDURES
When single-folding drawing paper or fine
quality thick paper (127g/m
2
), the edge of
the folding line of the paper or a part near
the center may bend due to environmental
conditions (temperature, humidity), paper
size, paper jamming, paper size, paper
fiber direction, etc. and not because the
unit has malfunctioned.
In such cases, perform the following
procedure.
7-3. SINGLE-FOLDING HARD PAPER NEATLY
1
The stopping position of the stopper
is too close. Rotate the fine
adjustment knob of folding plate 2 to
the right by 1/4 turn so that the
stopper is appropriately apart from it.
2
Press the START button and start
folding operations.
If folding problems occur again
during operations, press the STOP
button to stop the unit. Once the unit
has stopped completely, rotate the
fine adjustment knob of second
folding plate to the right by 1/4 turn so
that the stopper is appropriately apart
from it. Resume operations again.
Bent at edge
Bent near center
Fine adjustment knob
Second folding plate