Duplo DF-1200 Скачать руководство пользователя страница 37

Страница: 37 / 98

2-9

Chapter 2 Basic Operation

A4 +0.0/+0.0

Ready

Press the or key to set the

processing speed.

The default of processing speed is [5]. Folding

misalignment, etc. May occur depending on

the paper used and folding mode. If so, lower

the processing speed.
When paper jam or abnormal folding occurs by using thin and flimsy paper, adjust the processing

speed referring to “Thin paper mode”.

(p.3-18)

The processing speed can be changed during folding process or in the idling state.

(p.3-32)

However,

folding misalignment may be caused by changing the processing speed largely.

When setting the folding mode of B6 size paper to double fold, the operable processing speed is

[4] or more. Even if the processing speed is set to [0] to [3], the processing speed will be changed

automatically to [4] when the test key or start key is pressed.

[A]
[B]

Adjust the position of the paper

receiving tray.

Set to [A] to stack ejected paper diagonally.
Set to [B] to stack ejected paper straight.
Refer to Chapter 3 “6. Stacking the Folded

Paper” (p.3-18).

Press the test key.

Perform test folding.
Test folded paper are not counted in the

number of sheets processed.

If this machine does not start by pressing the test key, automatic detection of paper size may

not function. Check the paper feed guide is set appropriately to the scale of paper size.

<along vertical

length of paper>

Check the finish of test folding.

Check the last sheet of test folded paper for

folding misalignment.

When folding misalignment occurs, refer to

Chapter 3 “1. Correcting Folding Misalignment”

(p.3-1)

Содержание DF-1200



































































































Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды

Duplo DF-1200, Инструкция по эксплуатации

Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды