Duplo DF-1200 Скачать руководство пользователя страница 58

Страница: 58 / 98

3-18

Chapter 3 Advanced Operation

6. Stacking the Folded Paper

The angle of the paper receiving tray of this machine can be changed. If the angle is changed, the folded

paper can be stacked in the following two ways according to the purpose.
Diagonal stacking: Basic paper stacking method
Straight stacking: Used when the folded paper in folding modes such as gate fold with thick paper

(81.4 g/m

/22 lb or more) is retained at the ejection section.

Diagonal stacking

Straight stacking

7. Function Setting

Function setting can be performed for shortening the operation procedure or adjustment according to the

paper used based on the purpose of the user.

7-1. Thin paper mode

Use the thin paper mode when abnormal folding or paper creasing occurs by handling thin and flimsy paper

such as rough paper, recycled paper, etc. Use this mode absolutely for thin paper. Paper jam may occur if this

mode is used for other than thin paper.

A4 +0.0/

Ready

Press key on the top screen, and set

the processing speed to [1].

A4 +0.0/

Ready

Press the key.

The processing speed display reverses, and

the thin paper mode has been set.
Press the key to clear the thin paper mode.

Содержание DF-1200



































































































Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды

Duplo DF-1200, Инструкция по эксплуатации

Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды