manualshive.com logo in svg

Duplo DC-445, Инструкция по эксплуатации, Страница: 42 / 48

Поделиться
Скачать
Duplo DC-445 Скачать руководство пользователя страница 42

 39

Daily Maintenance

 

 

●

 How to maintain the machine

 

 
Check the machine periodically to maintain its performance. 

 

WARNING 

●

 Before cleaning, be sure to turn the power off, 

wait until the machine cools off and unplug the 
power cord.  Otherwise, fire or electric shock 
may occur.

 

●

 Never remove covers on the machine or modify 

 them.

 

●

 Do not spill water or any liquid inside of the 

 machine.  It may cause fire or electric shock. 
  If it happens, contact our service person.

 

 

Clean the exterior in the following procedures. 
1.  Use soft cloth with water or mild detergent. 
2.  Wipe the exterior. 
3.  Wipe off the liquid with dry soft cloth. 

 

WARNING 

●

 Never use alcohol or solvent cleaner. 

  It may tarnish or damage the exterior 
 finish.

 

●

 Do not put diluted petroleum or   

 insecticide.  It may cause fire.

 

 

Dust accumulation may cause the machine to malfunction.    Clean it once a week.    Contact our 
dealer as for cleaning of inside of the machine. 

Содержание DC-445

















































Отзывы:

Нет отзывов