14
8.5.6 After 2
nd
cut, backgauge moves to 3
rd
cut position automatically
8.5.7 After 3
rd
cut, the backgauge will cycling for 2
nd
book 1
st
cut
Note: Once a job is selected, using
and
to check cutting factor
8.6 Check Cutting Factor on a Job
8.6.1 Press
into program mode
8.6.2 Enter Job #
8.6.3 Press
to get into 1
st
cut
8.6.4 Press
to scroll down each cut
8.7 Editting an Existing Job
8.7.1 Press
into program mode
8.7.2 Enter Job # XX
8.7.3 Press
to get into 1
st
cut
8.7.4 Press
to select the cut needs to be changed
8.7.5 Enter the correct cutting length
8.7.6 Press
to save the change
8.7.7 Press
to save the job
