Dohse Aquaristik GmbH & Co. KG · Otto-Hahn-Str. 9 · D-53501 Gelsdorf
The VG Ocean Lux LED 80 W ballast can be used to operate two Ocean Lux LED lamps at the same time. Simply
connect the VG Ocean Lux LED 80 W ballast to the Y connecting cable and the Ocean Lux LED 23 W lamps. When
connecting the two cables be sure the connectors are fitted correctly. Then connect the power supply to a mains
socket.
Connecting the Ocean Lux LED Controller:
Use the Ocean Lux LED Controller to easily program natural simulations
of daylight and moonlight. The Ocean Lux LED Controller will simultaneously control two Ocean Lux LED lamps.
Please refer to the Ocean Lux LED Controller instructions for installation.
Note:
The VG Ocean Lux LED 80 W ballast is only suitable for operating LED lamps. Never install the VG Ocean Lux LED 80 W
ballast on or inside the cover frame. Only operate the power supply / VG Ocean Lux LED 80 W ballast with compatible
components (Ocean Lux LED, Ocean Lux LED Controller, connecting cable, Y connecting cable).
Technical Data:
· ballast for Ocean Lux LED lamp
· suitable for Ocean Lux LED 23 W lamps (connection via Y connecting cable)
· input: 100 – 240 V; 50 – 60 Hz, 1.5 A
· output: 24 V; 3.33 A
· 40 cm mains cable with earth contact
· cable length ballast – LED light plug connection: 50 cm
· cable connection: Mini Power Din 3-pin
· dimensions: 20 cm x 6.2 cm x 3.9 cm
· ta: 60° C / tc: 80° C
· ballast must not be installed on or inside the cover frame ballasts reach temperatures up to 85° C
· suitable for LED lamps only
Technical specifications subject to change.
Warranty:
Dohse Aquaristik GmbH & Co. KG offers a warranty period of 24 months from the date of purchase. In the
event of a warranty claim or if repairs are required, please send the device back to the retailer from which it was the acquired.
You can find the warranty card with the warranty terms in the Service section of our website: www.dupla-marin.com
Disclaimer:
Dohse Aquaristik GmbH & Co. KG assumes no liability for damages resulting from use of the device.
Declaration of conformity:
The manufacturer certifies that the devices conform with EMC directive 2014 / 30 / EU.
1. Ocean Lux LED channel 1 + 2
2. Ocean Lux LED channel 3 + 4
3. Ocean Lux LED 23
W lamp connection
4. Ocean Lux LED 23
W lamp connection
5. USB connection for PC
6. VG Ocean Lux LED 80
W (Item no.: 81508)
7. Connecting cables* (Item no.: 81506)
8. Y connecting cable* (Item no.: 81500)
9. Ocean Lux LED Controller* (Item no.: 81506)
* not included, sold separately
1.
2.
3.
3.
4.
4.
5.
9.
7.
8.
6.
