20
DUOTONE
FOIL WING 20 MANUAL
BLADDER REPAIR
7.3.
RE-INSERTING LEADING EDGE BLADDER
1. Before you begin to reinsert the bladder make sure the air valves are aiming in the direction of
the valve opening.
3. Pull carefully on the line coming out of the middle of the leading edge and feed the bladder back
into the cavity.
4. Be sure that it is inserted correctly without twisting.
5. When the bladder is completely inserted, make sure
that the air valves are positioned correctly in the valve opening.
6. Position the Air Port Valve II in the valve
opening. Make sure that the 2 pins of the valve
are positioned correctly into the leading edge.
7. Screw the secure ring back onto the valve.
8. Fill the leading edge with air carefully.
9. Check that the bladder has been correctly inserted and look for wrinkles in the material. If you
detect any irregularities in the air tube or if the valve is not positioned correctly, deflate and start
over again.
10. Roll up the excess bladder and close the flaps at the wing tips.
WINDSPEED AND FOIL WING SIZE
