®
Using the Dunlop UV-1SC Uni-vibe Stereo Chorus:
EFFECT/BYPASS SWITCH:
Selects between Effect and No Effect.The red LED will pulsate at the rate of
speed when the effect is on.
SPEED:
Controls the rate of the Chorus/Vibrato effect.The speed can be varied from
an almost imperceptibly slow speed to about eight times per second.
MIX:
Controls the amount of dry signal mixed into the “Right/Vibrato” output, and
the amount of effect mixed into the “Left/Chorus” output.
INTENSITY:
Adjusts how much the chorus/vibrato affects your signal.
Going easy with these controls and moving them a little at a time is probably
the best way to get a handle on their operation.
INPUT JACK:
Connect a cable from your instrument or effects chain here.
POWER:
Connect the power supply here.The Dunlop UV-1SC is designed to be exter-
nally powered with the Dunlop ECB02 AC Adapter.This is a 9 volt regulated
adapter with a 3.5mm positive tip.
SIDE PANEL CONNECTORS:
FRONT PANEL CONTROLS:
DUNLOP MANUFACTURING, INC.
P.O. BOX 846, BENICIA, CA 94510 U.S.A.
P O S I T I V E T I P
LEFT/CHORUS:
Connect a cable to the input of your amp, other effects, recording mixer or
other inputs here.When the “LEFT/CHORUS” output is used:The “MIX” con-
trol, when fully clockwise, is the MONO CHORUS mode, and fully counter
clockwise is dry.
RIGHT/VIBRATO:
Connect a cable to the input of your amp, other effects, recording mixer or
other inputs here.When the “RIGHT/VIBRATO” output is used:The “MIX” con-
trol, when fully clockwise, is the MONO CHORUS mode, and fully counter
clockwise is VIBRATO.Vibrato bends the pitch up and down, giving a cool, quiv-
ering texture to your sound.
When both outputs are used:The “MIX” control, when fully clockwise, is the
MONO CHORUS mode with a centered sound image, and fully counter clock-
wise, is the “WIDE” Stereo mode.
