5. SECOND GUIDE ROPE SET UP
Make the loops on the Second Guide Rope tension clips large enough to slip over the stakes already in the
ground. Make sure that the Guide Rope loops are placed under the stake hooks as shown in
FIG. 5
6. NET HEIGHT ADJUSTMENT
The height of the net can be adjusted by depressing the push buttons on the middle poles and raising or lowering
the poles until the push buttons are aligned with the holes in the bottom poles.
FIG. 5
TIP:
After the net is completely assembled, you
can adjust the net tension by sliding the tension
clips up or down along the guide ropes.
FIG. 6
VOLLEYBALL& BADMINTON SET
ASSEMBLY INSTRUCTIONS
MODEL NET320_057D
www.themdsports.com
NET320_057D
4
R
R
Guide
Ropes
Ground
Stakes
Second
Guide
Ropes
Push Button
Push Button
Push Button
2
3
4
2
3
4
2
3
4
6ft. pole
7ft. pole
5ft. pole
7. COURT MARKING KIT
Lay out green rope as per diagram. Slip metal “
U
” stake in hole at bottom of each and secure rope to metal stakes
with flags in an upright position at each corner.
30 FT
30 FT
30 FT
Stake &Flag
Stake &Flag
Green Rope
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
