Dunlop MXR Sub Machine CSP210, Руководство пользователя

Страница: 2 / 2

SAMPLE SETTINGS
CSP210 SUB MACHINE
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
7
• NOTE : To get the best results from Octave Up settings, play above the 10th fret with neck pick up selected.
HIGH OCTAVE
HAZE DOUBLE PALEO
OCTAVE SUBTERRANEAN
GARAGE
DIRECTIONS
• Run a cable from your guitar to
the CSP210’s INPUT jack and run
another cable from the CSP210’s
OUTPUT jack to your amplifier.
• Turn the effect on by depressing
the BYPASS footswitch.
• Start with all controls at
12 o’clock.
• Rotate SUB control clockwise to
increase volume of Sub-Octave
signal or counterclockwise to
decrease it.
• To engage the Fuzz signal’s
Octave Up mode, depress the
OCTAVE footswitch.
• Rotate VOLUME control clock-
wise to increase volume of fuzz
DESCRIPTION
• Combines La Machine Fuzz with
old school Sub-Octave signal
• Separate volume levels for Fuzz
and Sub-Octave signals
• Toggle between Series/Parallel
modes
• Octave switch kicks Fuzz signal
into Octave Up mode
signal or counterclockwise to
decrease it.
• Rotate TONE control clockwise
for a warmer fuzz sound or
counterclockwise for a brighter
fuzz sound.
• Rotate FUZZ control clockwise to
increase amount of fuzz or coun-
terclockwise to decrease it.
• Pushing the SERIES switch
toggles between Parallel mode
(switch OUT)—which runs the
Sub-Octave and Fuzz signals
independently of each other—
to Series mode (switch IN, indi-
cated by yellow LED), which runs
the Sub-Octave signal into the
Fuzz signal.
POWER
The Sub Machine Fuzz is powered
by one 9-volt battery (remove
bottom plate to install), a 9-volt
AC adapter such as the Dunlop
ECB003/ECB003EU, or the
DC Brick™ and Iso-Brick™
power supplies.
SPECIFICATIONS
Input Impedance
1 MΩ
Output Impedance < 600 Ω
Noise Floor* -100 dBV
Bypass -99 dBV
Effect -78 dBV
Maximum Input 2.5 dBV
Bypass Buffered
Current Draw 7 mA
Power Supply DC 9 volts
All measurements made at 1 kHz, with controls at
mid position
CONTROLS
VOLUME knob controls volume
of fuzz
TONE knob shapes overall
EQ of fuzz
FUZZ knob controls amount
of fuzz
SUB knob controls volume of
Sub-Octave signal
BYPASS footswitch toggles
pedal on/bypass (blue LED
indicates on)
SERIES switch toggles
Series/Parallel modes
(yellow LED indicates Series)
OCTAVE footswitch engages
Octave Up fuzz
(indicated by red LED)
7
1
2
3
4
5