Dunlop MXR Phase 45, Руководство по эксплуатации

Страница: 2 / 2

DESCRIPTION
• Hand-wired circuit board built with
original-spec 1975 components
• Original high-quality Switchcraft
Input/Output jacks and Carling
bypass switch
• Hand-selected FETs, matched to
produce deep and rich phasing
• All analog circuitry for warm
analog tone
POWER
The MXR Phase 45 is powered by one
9 volt battery, accessed by removing the
bottom plate of the pedal.
CONTROlS
• Footswitch toggles effect on/bypass
• Speed knob regulates overall effect rate
“DIAMOND lUCY”
60’S PSYCHEDELIC
“PHASE OF SIGHS”
70’S STONER
CSP105 ‘75 VINTAGE PHASE 45
DIRECTIONS
• Run a cable from your guitar to the
Vintage Phase 45’s Input jack and run
another cable from the Vintage Phase
45’s Output jack to your amplifier.
• Set the Vintage Phase 45’s Speed
control knob to the 12 o’clock position.
• Turn the effect on by depressing
the footswitch.
• Rotating the Speed knob in a clockwise
motion results in a faster phase effect,
counterclockwise for a slower effect.
SAMPlE SETTINGS
4:00 1:00
SPECIFICATIONS
Input Impedance
500 kΩ
Output Impedance 5 kΩ
Max Input Level -5 dBV
Signal to Noise Ratio* > 96 dB
Phase Shift Range 360°
Bypass Hardwire
Current Draw < 1 mA
Power Supply 9 volt battery
*All controls at mid position, A-weighted,
V
REF
= 1V
RMS
9:30
“GRAFFITI PHYSICAllY”
CLASSIC ROCK
1:00
“NASHVIllE”
CLASSIC COUNTRY