GZR95
GEEZER BUTLER CRY BABY
®
WAH
POWER
The Geezer Butler Cry Baby Wah is
powered by one 9-volt battery (accessed
via the bottom of the pedal), an AC adapter
such as the Dunlop ECB003, or the MXR
DC Brick
™
and Iso-Brick
™
power supplies.
INTERNAL CONTROLS
•
Q knob adjusts frequency width of
wah effect
•
AUTO-RETURN DELAY sets how
long effect rings out after rocker
returns to heel position
SETUP INSTRUCTIONS
• Run an instrument cable from your
guitar to the GZR95’s INSTRUMENT
jack and another instrument cable from
the GZR95’s AMPLIFIER jack into your
amplifier’s input.
• The GZR95 is bypassed (turned off)
whenever your foot is off the pedal.
To turn it on, simply press toe of rocker
down with your foot.
•To access internal controls, remove
bottom plate.
• Rotate the Q knob clockwise for a
narrower frequency range and more pro-
nounced wah effect or counterclockwise
for a wider frequency range and subtler
wah effect.
• To increase effect ring-out time, remove
bottom plate and rotate AUTO-RETURN
DELAY pot counterclockwise (set to
12 o’clock by default). To decrease
effect ring out time, rotate the
control clockwise.
• Rock your foot back and forth on
the pedal to hear the vocal, expressive
tones that the Cry Baby Wah is
famous for.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
SPECIFICATIONS
Impedance
Input
230 K
Ω
Output
1 k
Ω
Resonant Frequency
Heel Down
400 Hz
Toe Down
2000 Hz
Output Characteristics
Heel Down Gain*
+16 db / 0 dB
Toe Down Gain*
+17.5 dB / +14.5 dB
Bypass
Automatic Buffered
Delay**
45ms to 560ms
Delay Factory Preset
290ms
Noise Floor***
Bypass
-102 dBV
Heel Down (Effect On)
-99 dB
Toe Down
-90 dBV
Current Draw
2.75 mA
*Q ADJ full CW/CCW
** AUTO-RETURN DELAY ADJ full CW/CCW
*** A-weighted, Q ADJ to 1 o’clock factory setting,
0 dBV = 1VRMS
