Dunlop CRY BABY Q ZONE QZ1, Быстрый старт

Страница: 3 / 4

QZ1 CRY BABY
®
QZONE
™
FIXED WAH
3
BASIC OPERATION
POWER
The Cry Baby
®
Q Zone
™
Fixed Wah is powered by one 9-volt
battery (remove bottom plate to install), an AC adapter such as
the Dunlop ECB003/ECB003EU, or the DC Brick
™
and Iso-Brick
™
power supplies.
OPERATION
1.
Run an instrument cable from your guitar to the QZ1’s
INSTRUMENT jack and another instrument cable from the QZ1’s
AMPLIFIER jack into your amplifier’s input.
2. Start with VOLUME, Q ZONE, and PEAK controls at 12 o’clock.
3. Turn effect on by depressing footswitch.
4. Rotate VOLUME knob clockwise to increase overall output of
effect or counterclockwise to decrease it.
5. Rotate Q ZONE knob clockwise for a narrower bandpass to
emphasize higher end harmonics or counterclockwise for a wider
bandpass that emphasizes lower end harmonics.
6.
Rotate PEAK knob clockwise for a brighter frequency center or
counterclockwise for a lower frequency center.