Dungs EMP-5, Инструкция по установке, Страница: 1 / 9

1 … 9
MC • Karl Dungs
, Inc.
• EMP-5 • Edition 2017.05 • P/N 261483
EMP-5
Current or Voltage Input
Drive Modulating Actuator
Installation Instruction
Table of Contents
USA
CDN
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Operation Description . . . . . . . . . . . . . . . . . . . . Page 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Replacing EMP-3 or EMP-4 with EMP-5 . . . . . . Page 3
Standard Wiring of EMP-5 . . . . . . . . . . . . . . . . . Page 4
Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Potentiometer Adjustment and Jumpers . . . . . Page 6
Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Technical Tips and Data . . . . . . . . . . . . . . . . . . . Page 7
Troubelshooting . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8
Approvals
1, 2, 3 . . . = Action
• = Instruction
Explanation of symbols
Attention
Please read the instruction be-
fore installing or operating . Keep
the instruction in a safe place . You
find the instruction also at www.
dungs .com If these instructions
are not heeded, the result may
be personal injury or damage to
property .
Any adjustment and application-
specific adjustment values must
be made in accordance with
the equipment manufacturers
instructions .
Safety
first
O.K.
Accessories & Replacement . . . . . . . . . . . . . . . Page 9
The installation and maintenance
of this product must be done
under the supervision of an ex-
perienced and trained specialist .
Never perform work if gas pres-
sure or power is applied, or in
the presence of an open flame.
On completion of installation on
the EMP, perform a function test .
This product is intended to be
used in combination with a con-
trol valve to modulate the flow of
gas or air .
IFGC
CSA
UL
ANSI
NFPA
UL Listed: UL 873 and CSA C22 .2 No . 24-93