DUNE HD SOLO LITE, Руководство пользователя

Страница: 11 / 16

1 1
After you see a picture on the TV screen, press the “ENTER” RC button, and then go to the player setup
menu to perform a more precise configuration of the video output mode if needed.
NOTE: The procedure of quick setting of video output mode cannot be used during playback and in some
other cases. To ensure this procedure can be used, switch the player off, then switch the player on, and then
wait about 1 minute to ensure the player loading is finished. After that press "STOP" RC button to ensure
playback is stopped. Then use "REC" RC button.
To connect a USB drive, go to “Sources” section of the player menu and connect the USB drive to an USB
port of the player. The player will recognize the USB drive, and will show an item corresponding to the USB
drive on the main screen.
When connecting a USB drive requiring significant power (such as USB HDD), use an external power supply
for the USB drive. Power provided by the USB ports of the player may not be enough for correct functioning
of the USB drive.
Do not disconnect or switch off the USB drive when some write operation is in progress.
To format the HDD attached to the player, select the HDD item in “Sources” section of the player menu, press
the “INFO” RC button and choose “Format Disk” (to format the entire disk) or “Format Partition” (to format an
already existing disk partition only). Then choose the type of file system: if you want to use the HDD only with
the player, “EXT3” is typically a good choice; if you want to connect the HDD to a Windows PC, “NTFS” is
typically a good choice. The player will format the disk. To format an unformatted HDD, just press the
“ENTER” RC button on the HDD item.
NOTE: To use disks formatted by the player into “EXT2” or “EXT3” file system on a Windows PC, you may
need to install additional software on the PC, such as “EXT2FSD” (http://www.ext2fsd.com/).
To connect a network drive using SMB or NFS protocol, go to “Sources” section of the player menu, press
the “POP UP MENU” RC button, and choose “Create Network Folder”, then fill the parameters of the
network drive as needed. The player will show an item corresponding to the configured network drive on the
Connecting USB Drives
Formatting HDD
Accessing Network Drives
USER MANUAL