Dundalk LeisureCraft Cedar Indoor Cabin Sauna
Assembly Instructions
5.
Benches
:
The height of the benches is up to you. Most people like the lower benches about 16-18” from the wooden
sauna floor (Duck Boards) and the top bench a similar distance above the lower one. First, lay down the
duck boards. In the larger sized saunas, the duck boards may be in two separate halves. Begin by marking
for the top of the bench from the duck boards. (see Fig. 5.1). For saunas with 6’ or longer benches, fasten
the middle bench supports to the pre-installed cross support board on the bottom of the lower bench.
Start three 2½” screws into the bench supports under the ends of the bench(s). Have someone hold the
bench in line with the wall markings while you drive the screws into the sauna walls.
Fig. 5.1
6.
Roof installation:
Finish assembling the walls. The top pieces are factory build assemblies and consist of boards with flat tops
and ceiling supports fastened to the sides as shown in Figs 6.1 and 6.2.
Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisurecraft.com
Fig. 5.2
Fig. 6.1
Fig. 6.2
