Explanation of Controls
tempo and the tremolo pulsations will occur in triplets. (Don’t worry if
this sounds confusing—it’s actually really intuitive and fun when you’re
plugged in.)
8. Heartbeat LED –
“How fast am I going?” In addition to indicating the
pedal’s on/off status, this light pulses in time with the tremolo effect for
easy Rate setting. The character of the LED also changes to reflect the
Wave and Shape settings, for a highly intuitive visual reference.
9. True-Bypass Footswitch –
“Get out of my signal path!” Shutting the
pedal off removes the circuit from your guitar’s signal chain. This allows
your guitar’s signal to pass through the Shape Shifter without affecting
your tone or gain. In addition, when bypassed, the processor goes into a
sleep mode to preserve battery life.
Back Panel
1. Input Jack –
Plug in your guitar signal here. (or if compatible, the send
from your amp’s effects loop)
2. Output Jack –
Provides the output signal. Run a cable from this jack to
the input of a guitar amp. (or if compatible, the return jack of your amp’s
effects loop)
3. Power Jack –
This is where you can connect a regulated 9-volt DC
adapter (center negative) such as the Seymour Duncan 11802 if you opt
not to run the Tremolo on a 9-volt battery.
BACK PANEL
1
3
2
