(Not So) Clean Boost
Want to clobber the input of your
cool old tube amp? Play this sound
through it and hear how raunchy
that amp can really get. Use the
Rumble control to dial in just the
right amount of low end. Yeah!
Battery
To make your Lava Box work, you’ll either need to insure that a fresh
9-volt battery is installed or connect a regulated 9-volt DC power
supply—such as a Seymour Duncan 9-volt power adapter.
To install or replace the battery:
a. Remove the four screws on the underside of the box and disassemble
the chassis.
b. Remove the old battery from the clip, if applicable.
c. Install a fresh 9-volt alkaline battery, taking care to properly orient the
“+” and “-” terminals.
d. Reassemble the chassis and replace the screws.
When storing the Lava Box, or when it is not in use, make sure no cable is
plugged into the Input jack, as this will shorten battery life.
6
