Specifications:
Type of circuitry:
The Killing Floor uses a hybrid J-FET/Op-Amp, optimized for low
order harmonics
Bypass:
True hard-wire bypass
Control Functionality:
Gain Control Range
– 0dB to 34dB
Voicing Switch:
Up
– High Boost, 7 dB @ 10 kHz
Middle
– Flat Response
Down
– High Cut, 1st order, -3dB @4.8 kHz
Bypass (Footswitch)
– Engages the boost effect
Input Impedance:
1M Ohm
Output Impedance:
1K Ohms
THD @ 1 Vo:
1.2% - all 2nd harmonic
Noise referred to input:
120dBV (with Gain set for 34dB)
Power:
9V battery or external 9V to 18V Regulated DC Adapter (center negative)
Current Consumption:
3.7mA in active mode, 2.2mA in bypass mode
Dimensions:
2.61” X 4.90” X 1.40”
Weight:
0.8lb. without battery, 0.9lb. with battery
