Duncan Deja Vu SFX-10, Руководство пользователя

Страница: 14 / 16

14
Technical Specifications
Input Impedance – 1 Megohm (1000K ohms)
Output Impedance – 1K ohm (1000 ohms)
Power source – 9V battery or external 9VDC regulated wall transformer
with center pin negative.
Current drain –
65mA
.
Delay time – 3ms to 20 seconds
Regeneration – Continuously adjustable from “off” to runaway build-up
Modulation – Dither of time delay, adjustable among various combina-
tions of frequency and amplitude.
Analog Delay Element –
NMOS Bucket Brigade Device (BBD)
Digital Delay Element – Microprocessor-controlled 24 bit Codec and
SDRAM
Output Clipping Level – 7V Peak-to-Peak
Dynamic Range – Dry Signal 116dB; Digital Delay 93dB; Analog Delay
80dB
Noise Referred to Input – Dry Signal -110dBV
Delay Ratio Multipliers – 1, 1.33 (dotted eighth note), 2, 3, 4
Distortion – Dry Signal 0.003%; Digital Delay; Analog Delay 0.08%
Nominal Gain – 1:1
Battery Life –
5 hours with premium alkaline or 12 hours with lithium
battery
Bypass Type – Switch selectable between hardwire true bypass and elec-
tronically switched trailing repeats.