IMPORTANT:
In order for the Quadra tone Footswitch to have full control over the
various functions, make sure the amp is in the green (clean) channel and all Boosts
and Crunch are off (pushed in) on the front panel. Then simply plug the Programmable
Footswitch into the "4 Function" DIN jack on the front of your
84-50.
DIP switches inside the footswitch allow you to create the ~ sounds most useful to you.
The footswitch comes pre-programmed as follows:
#1 Button - Green Channel = "Fendery" clean with good presence & depth.
#2 Button - Red Channel = Tight, punchy, dirty rhythm - Fat, bluesy lead.
#3 Button - Red Channel with Boost 2 = Hi Gain lead, smooth, rich in harmonics and
lots of sustain.
#4 Button - Red Channel with Boost 1, Boost 2 and Crunch
USING THE 84-50 WITH A MIDI SET -UP
With the addition of a Duncan adapter cable (Model #
128017)
and a programmable
MIDI switching device such as the Scholz MIDI Octopus, you can place functions of the
84-50 under MIDI control:
Содержание 84-50 Tube
Страница 8: ...Note your favorite 84 50 Tube Tones ...
