Dump Dolly Power Скачать руководство пользователя

Страница: 3 / 7

Electric

Steps:

Step 1: Place can onto the Power Dump Dolly

1. Move nose plate under the can OR place can onto the nose plate.

2. Place the elastic cord around the base of the can.

3. Loosen the trash can clip knob.

4. Lift the trash can clip up, then down and secure to the rim of the can.

5. Tighten the trash can clip knob.

*Note

: Do not over tighten.

Содержание Power

Страница 2: ...er Hooks Orange Black hooks attached to the top of the dolly to place on rim of the dumpster Dumpster Latch vary by models Used for 8 yard dumpsters to prevent dolly from falling forward instead of onto the dumpster 2 ...

Страница 3: ... plate under the can OR place can onto the nose plate 2 Place the elastic cord around the base of the can 3 Loosen the trash can clip knob 4 Lift the trash can clip up then down and secure to the rim of the can 5 Tighten the trash can clip knob Note Do not over tighten 3 ...

Страница 6: ...nt the current Power Dolly design but still allow for understanding how it functions CAUTION Operate only when leaning on dumpster THE POWER DUMP DOLLY HAS SAFETY SWITCHES AT THE TOP AND BOTTOM TO STOP THE SLIDING CARRIAGE WHEN IT REACHES THE LIMITS OF THE TOP AND BOTTOM WHILE HOLDING DOWN THE BUTTON SHOULD THE WINCH CONTINUE TO RUN WHEN AT THE BOTTOM CAUSING SLACK IN THE 6 ...

Страница 7: ...CTION SHOULD THIS OCCUR IMMEDIATELY STOP PRESSING THE OUT DOWN BUTTON AND PRESS THE IN UP BUTTON THIS WILL TEMPORARILY ALLOW SLACK IN THE STRAP UNTIL THE STRAP BECOMES TIGHT AND THE CARRIAGE STARTS GOING UP RELEASE THE BUTTON AND NORMAL USE CAN NOW RESUME FOR MORE INFORMATION CALL325 227 8051 7 ...