331 Auto Creaser 10
5.2 Quick Start
To access to crease job
(Such as a job that crease on 10mm, 20mm and 30 mm )
1. Turn on machine, screen 1 will appear after welcome page.
Screen 1 screen2
2. Press M 1 time, screen jump to Screen 2, line [1] will flash.
3. Enter line [1] value, 1and 0 .Press Enter, line [2] will flash.
4. Enter line [2] value, 2 and 0 .Press Enter, screen jump to screen 3.
Screen3 screen 4
5. Line [3] will flash, Enter line [3] value 3 and 0, press Enter, line [4] will flash
6. Press Enter when line [4] is 0, screen will jump to screen 4
7. Press RUN, feed a sheet. Paper is creased at 10mm, 20mm, 30mm
(crease line distance from the leading edge).
8. Press STOP if you want the job stopped
