Dukane ImagePro 8918 Скачать руководство пользователя

Страница: 62 / 137

Maintenance

Inside of the projector

In order to ensure the safe use of your projector, please have it cleaned and

inspected by your dealer about once every year.

Caring for the lens

If the lens is flawed, soiled or fogged, it could cause deterioration of display

quality. Please take care of the lens, being cautious of handling.

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufficiently.

After making sure that the projector is cool adequately, lightly wipe the lens

with a commercially available lens-cleaning wipe. Do not touch the lens

directly with your hand.

Caring for the cabinet and remote control

Incorrect care could have adverse influence such as discoloration, peeling paint,

etc.

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufficiently.

After making sure that the projector is cool adequately, lightly wipe with gauze

or a soft cloth.

If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner

diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a

soft, dry cloth.

Other care

WARNING

►Before caring, make sure the power switch is off and the

power cable is not plugged in, and then allow the projector to cool sufficiently.

The care in a high temperature state of the projector could cause a burn and/or

malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so

dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result

in a fire, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the

projector.

• Do not use aerosols or sprays.

CAUTION

►Please take right care of the projector according to the

following. Incorrect care could cause not only an injury but adverse influence

such as discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those specified in this manual.

►Do not polish or wipe with hard objects.

Содержание ImagePro 8918










































































































































Результаты поиска

Содержание ImagePro 8918

Отзывы:

Похожие инструкции для ImagePro 8918

Бренды по названию

Популярные бренды

Dukane ImagePro 8918, Руководство пользователя

Результаты поиска

Содержание ImagePro 8918

Отзывы:

Похожие инструкции для ImagePro 8918

Бренды по названию

Популярные бренды