Dukane ImagePro 28A8035, Руководство по эксплуатации

Страница: 20 / 36

20
1. Input / output signal
Connection to the RGB signal terminal
2. Signal input / output terminal
5 1
10 6
15 11
D-sub 15pin shrink terminal
(Female)
1. Input signal
Connection to the video signal terminals
2. Signal input terminal
Ground
Luminance signal
S VIDEO input (Mini DIN4 pin)
Ground
Chrominance signal
Caution
Video input signal terminals have priority in the following order.
S-VIDEO input terminal RCA jack input terminal
Even when the video signal is displayed, only an audio signal is output to RGB audio output terminals.
2 1
Caution
Do not use RGB cable other than that specified.
Some RGB cable may not operate DDC (Display Data Channel)
because there are not connect from pin NO.
to pin NO. .
12 15
S-VIDEO signal
Luminance signal 1.0Vp-p, 75
W
termination
Chrominance signal 0.286Vp-p (burst signal), 75
W
termination
VIDEO signal 1.0Vp-p, 75
W
termination
AUDIO signal
Input 200mVrms, 20k
W
below (MAX 3.0Vp-p)
Output
0~200mVrms, 1k
W
Video signal Analog 0.7Vp-p 75
W
termination (Positive polarity)
Horizontal sync signal TTL level (Positive/negative polarity)
Vertical sync signal TTL level (Positive/negative polarity)
Composite sync signal TTL level
Audio signal
Input 200mVrms, 20k
W
below (MAX 3.0Vp-p)
Output 0~200mVrms, 1k
W
1 Video signal (Red)
2 Video signal (Green)
3 Video signal (Blue)
4 N.C
5 N.C
6 Ground (for R)
7 Ground (for G)
8 Ground (for B)
9 N.C
10 Ground
11 N.C
12 DDC (Display Data channel) RGB1 only
13 Horizontal/Composite sync signal
14 Vertical sync signal
15 DDC (Display Data channel) RGB1 only