DUKANE AV
11
Chapter 4 Installation
4.1 Setup the Digital Visualizer
1.
Pull up the arm. The camera head should be aimed at the center of the Visualizer.
2.
Press and hold the Lamp release on both side of the Visualizer and push the Lamp release outside
to pull up the lamp.
3.
Turning the camera head toward the platform according to the direction of the arrows below.
※
Note
：
The angle of the camera head is limited. Don’t turn it forcefully when it reaches the maximal
angle.
4.2 Turning ON the Digital Visualizer
※
Note
：
Before using the Digital Visualizer, make sure that you have connected it to the computer,
video source, or other output devices. See Figure: 3-2, Rear View for the position of the connector
jack.
1.
Press <POWER> and open Digital Visualizer. The red LED (blinks till finishing the initialization). It
then becomes green.
2.
Press <LAMP> on remote control to activate light sources on both sides or the backlight source.
3.
You can position the lamp at an angle to obtain better illumination.
