English
-
31
Chapter 9 Troubleshooting
This chapter describes problems you may encounter while using 445. If you have questions, please refer to related chapters and
follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center.
No.
Issues
Solutions
1
Boot without power
Make sure you have plugged in the power cord.
2
No image output
from the 445
1. Check the power.
2. Check the connection, Refer to
445 User Manual
Chapter 4 Installation and Connections 4.3
Connecting Devices
3. Check the [Source], refer to
445 User Manual
Chapter 7 Descriptions of major functions 7.1 I
would like to switch image sources
4. Check the settings for the source of the
projector.
For the appropriate input selection of the projector,
refer to the
projectors
user manual
5. Check if DIP Switch is properly set. Refer to
445
User Manual Chapter 5 DIP Switch Settings
for
related settings.
3
Unable to focus
Probably the document is too close. Press
[zoom -]
on
the
remote control or control panel
. Or increase the
distance between document and lens, then press
[AF].
4
Part of the image is
missing
Check the
Auto Image
setting of your
projector
.
Please refer to the user manual of the
projector.
5
Forget the password
for turning on
Please contact your distributor or the service center.
6
Visual Presenter V1,
queue or other
application cannot
be run
simultaneously
Visual Presenter V1, queue and other application
software cannot be executed simultaneously. Only
one application can be run at the same time. Please
close the currently running applications and then
execute the desired application.
Содержание Camera 445
Страница 10: ...English 9 3 3 Incorrect use ...
