background image

12

1.

  Turn the projector off, and unplug the power cord. Allow the 

projector to cool sufficiently.

2.

  After making sure that the projector has cooled adequately, 

slowly turn over the projector, so that the bottom is facing.

3.

 

Turn the battery cover in the direction indicated “

OPEN

” 

using such as coins. Then the battery cover will come up. 

While removing the battery cover, pick its knob.

4.

  Press the metal claw of the battery holder. Then the battery 

will come up. Remove the battery.

5.

  Replace battery with 

HITACHI MAXELL, Part No.CR2032

 

only. 

Put a new battery into battery case. Please make sure that the + 

is facing upward. Insert the battery case slowly into the battery 

slot until you hear the snap.

Note:  If the battery is placed in the battery holder upside-

down,

(1)  Remove the battery cover and turn the projector so that top 

faces up. 

(2)  While lifting the side of the projector closest to the lens, 

press the metal claw of the battery holder. The battery will 

fall out of the holder, so be careful not to lose it.

6.

  Close the battery cover. Replace the battery cover in place, 

then turn it in the direction indicated “

CLOSE

” using such as 

coins, to fix.

Internal clock battery

Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has 

stopped, please replace the battery according to the following procedures.

Battery Cover

 

OPEN

Knob 

Metal claw

“+” marking

 

CLOSE

WARNING

Always handle the batteries with care and use them only as directed. Battery may 

explode if mistreated. Do not recharge, disassemble or dispose of in fire. 

And also improper use may result in cracking or leakage, which could result in fire, 

injury and/or pollution of the surrounding environment.

• Be sure to use only the batteries specified.

• Make sure the plus and minus terminals are correctly aligned when loading a battery.

• 

Keep a battery away from children and pets. If swallowed consult a physician 

immediately for emergency treatment.

• 

Do not short circuit or solder a battery.

• Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place. 

• If you observe battery leakage, wipe out the leakage and then replace a battery. If the 

leakage adheres to your body or clothes, rinse well with water immediately.

• Obey the local laws on disposing the battery.

Содержание 8953H

















Отзывы: