Dukane 8755K Скачать руководство пользователя страница 36

Страница: 36 / 66

SETUP menu

Item

Description

MIRROR

Using the ▲/▼ buttons switches the mode for mirror status.

NORMAL

H:INVERT

V:INVERT

H&V:INVERT

If the Transition Detector is on and MIRROR status is changed,

TRANSITION DETECTOR ON alarm

(



)

will be displayed when

projector is restarted after the AC power is turned off.

STANDBY MODE

Using ▲/▼ buttons switches the standby mode setting between

NORMAL and SAVING.

NORMAL

SAVING

• When SAVING is selected and the projector is in the standby

state, the power consumption is lowered with some functional

restrictions as below.

- The RS-232C communication control is disabled except turning

the projector on and changing the STANDBY MODE setting.

- The STANDBY of the MONITOR OUT

(



below

) is invalid, and no

signal is output from the

MONITOR OUT

port.

- The AUDIO OUT STANDBY of the AUDIO SOURCE

(



)

invalid, and no signal is output from the

AUDIO OUT

ports

(



)

MONITOR OUT

The combination of a picture shown on screen and output from the

MONITOR OUT

port can be arranged in the menu.

The picture coming into the port selected in the (2) is output to the

MONITOR OUT

port while an image from the port chosen in the (1)

is on screen.

(1) Choose a picture input port using ▲/▼ buttons.

• Select STANDBY to specify the output from the

MONITOR OUT

port in the standby state. This selection is available only when

NORMAL is selected for the STANDBY MODE (



above

(2) Select one of the

COMPUTER IN

ports using ◄/► buttons.

Choosing the COMPUTER IN1 allows the following choice.

COMPUTER IN1

OFF

Choosing the COMPUTER IN2 allows the following choice.

COMPUTER IN2

OFF

Choosing other input or STANDBY allows the following choice.

COMPUTER IN1

COMPUTER IN2

OFF

• OFF disables the

MONITOR OUT

port.

• Initial settings for STANDBY are the following: COMPUTER IN1

when NORMAL is selected in STANDBY MODE; and OFF when

SAVING is selected in STANDBY MODE.

COMPUTER IN1

COMPUTER IN2



STANDBY



COMPONENT

VIDEO

S-VIDEO

(Y, Cb/Pb, Cr/Pr)

Содержание 8755K



































































Результаты поиска

Содержание 8755K

Отзывы:

Dukane 8755K, Руководство пользователя, Страница: 36 / 66

Результаты поиска

Содержание 8755K

Отзывы: