97
8.4 Command Control via the Network
<RXFDQFRQ¿JXUHDQGFRQWUROWKHSURMHFWRUYLDWKHQHWZRUNXVLQJ56&
commands.
Communication Port
The following two ports are assigned for the command control.
Command Control Settings
48
)
&RQ¿JXUHWKHIROORZLQJLWHPVIURPDZHEEURZVHUZKHQFRPPDQGFRQWUROLVXVHG
Example
: If the IP address of the projector
is set to
192.168.1.10:
1) Enter “
http://192.168.1.10/
” into the
address bar of the web browser, and
select Projector Web Control from the
selection window.
2) Enter your user name and password,
and then click the
[OK]
.
3) Click the
[Port Settings]
on the main
menu.
4) Click the
[Enable]
check box to open
Network Control Port1 (Port: 23)
to use
7&3&OLFNWKH
[Enable]
check box
for the
[Authentication]
setting when
DXWKHQWLFDWLRQLVUHTXLUHGRWKHUZLVHFOHDU
the check box.
5) Click the
[Enable]
check box to open
Network Control Port2 (Port: 9715)
WRXVH7&3&OLFNWKH
[Enable]
check box for the
[Authentication]
VHWWLQJZKHQDXWKHQWLFDWLRQLVUHTXLUHG
otherwise clear the check box.
8. Other Functions
7&3
(Network Control Port1 (Port: 23))
7&3
(Network Control Port2 (Port: 9715))
&RPPDQGFRQWUROLVDYDLODEOHRQO\YLDWKHVSHFL¿HGSRUWDERYH
NOTE
