14
Turning off the power
1.
Press the
STANDBY/ON
button on the
projector or the remote control.
The message “Power off?” will appear on
the screen for about 5 seconds.
2.
Press the
STANDBY/ON
button again while
the message appears.
The projector lamp will go off, and the
POWER
indicator will begin blinking in
orange. Then the
POWER
indicator will stop
blinking and light in steady orange when the
lamp cooling is completed.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
Ź'RQRWWRXFKDURXQGWKHODPSFRYHUDQGWKHH[KDXVWYHQWV
during use or just after use, since it is too hot.
Ź5HPRYHWKHSRZHUFRUGIRUFRPSOHWHVHSDUDWLRQ7KHSRZHURXWOHWVKRXOGEH
close to the projector and easily accessible.
NOTE
Please power off the projector after any connected devices are
powered off.
7KLVSURMHFWRUKDVWKH$87232:(52))IXQFWLRQWKDWFDQPDNHWKH
SURMHFWRUWXUQRIIDXWRPDWLFDOO\)RUPRUHLQIRUPDWLRQSOHDVHVHHWKH³2SHUDWLQJ
Guide”
.
CALIBRATION
KEYSTONE/
ASPECT
ACCENTUALIZER HDCR
AV MUTE
POSITION
ESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP
ENTER
FOCUS
D-ZOOM
㸩
࣮
VOLUME
MAGNIFY
MYBUTTON
INPUT
PERFECT FIT TEMPLATE
STANDBY/ON
button
POWER
indicator
NOTE
The
ASPECT
button does not work when no proper signal is inputted.
)RUGHWDLOVVHHWKH2SHUDWLQJ*XLGHLQWKH&'
7KHUHPD\EHVRPHQRLVHDQGRUWKHVFUHHQPD\ÀLFNHUIRUDPRPHQWZKHQ
an operation is made. This is not a malfunction.
Operation (continued)
