95
8.4 Command Control via the Network
<RXFDQFRQ¿JXUHDQGFRQWUROWKHSURMHFWRUYLDWKHQHWZRUNXVLQJ56&
commands.
Communication Port
The following two ports are assigned for the command control.
Command Control Settings
(
44
)
4) Click the
[Enable]
check box to open
Network Control Port1 (Port: 23)
to use
7&3&OLFNWKH
[Enable]
check box for the
[Authentication]
setting when
authentication is required, otherwise clear the check box.
5) Click the
[Enable]
check box to open
Network Control Port2 (Port: 9715)
to
XVH7&3&OLFNWKH
[Enable]
check box for the
[Authentication]
setting
when authentication is required, otherwise clear the check box.
6) Click the
[Apply]
EXWWRQWRVDYHWKHVHWWLQJV
&RQ¿JXUHWKHIROORZLQJLWHPVIURPDZHEEURZVHUZKHQFRPPDQGFRQWUROLVXVHG
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter “
http://192.168.1.10/
” into the address bar of the web browser, and select
Projector Web Control from the selection window.
2) Enter your user name and password, and then click the
[OK]
.
3) Click the
[Port Settings]
on the main menu.
8. Other Functions
7&3
(Network Control Port1 (Port: 23))
7&3
(Network Control Port2 (Port: 9715))
&RPPDQGFRQWUROLVDYDLODEOHRQO\YLDWKHVSHFL¿HGSRUWDERYH
NOTE
