Dukane 8110H Скачать руководство пользователя

Страница: 60 / 65

Regarding the indicator lamps (continued)

• When the interior portion has become overheated, for safety

purposes, the projector is automatically shut down, and the indicator lamps

may also be turned off. In such a case, disconnect the power cord, and wait at

least 45 minutes. After the projector has sufficiently cooled down, please make

confirmation of the attachment state of the lamp and lamp cover, and then turn

the power on again.

NOTE

POWER TEMP

LAMP

Description

Blinking

Red

Lighting

Red

Blinking

Red

Turned

off

The cooling fan is not operating.

Please turn the power off, and allow the projector to cool

down at least 20 minutes. After the projector has sufficiently

cooled down, please make confirmation that no foreign

matter has become caught in the fan, etc., and then turn the

power on again.

If the same indication is displayed after the remedy, please

contact your dealer or service company.

Blinking

Red

Lighting

Red

Lighting

Red

Turned

off

There is a possibility that the interior portion has

become heated.

Please turn the power off, and allow the projector to cool

down at least 20 minutes. After the projector has sufficiently

cooled down, please make confirmation of the following

items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

• Does air from an air conditioner or similar unit blow on the

projector directly?

If the same indication is displayed after the remedy, please

set FAN SPEED of SERVICE item in OPTION menu to HIGH

(



)

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air filter.

Please immediately turn the power off, and clean or change

the air filter referring to the section “Cleaning and replacing

the air filter”. After cleaning or changing the air filter, please

be sure to reset the filter timer.

After the remedy, reset the power to ON.

Lighting

Green

Alternative

blinking in

Red

There is a possibility that the interior portion has

become overcooled.

Please use the unit within the usage temperature parameters

(5°C to 35°C).

After the treatment, reset the power to ON.

Troubleshooting

Содержание 8110H


































































Результаты поиска

Содержание 8110H

Отзывы:

Похожие инструкции для 8110H

Бренды по названию

Популярные бренды

Dukane 8110H, Руководство пользователя

Результаты поиска

Содержание 8110H

Отзывы:

Похожие инструкции для 8110H

Бренды по названию

Популярные бренды