Dukane 8104HW Скачать руководство пользователя

Страница: 11 / 106

Setting up

Before connecting the projector to a device, consult the manual of the device to

confirm that the device is suitable for connecting with this projector and prepare

the required accessories, such as a cable in accord with the signal of the device.

Consult your dealer when the required accessory did not come with the product or

the accessory is damaged.

After making sure that the device and projector are turned off, connect them

following the instructions below.

►Use only the appropriate accessories. Otherwise it could cause

a fire or damage to the device and the projector.

- Use only the accessories specified or recommended by the projector’s

manufacturer. Consult your dealer when the required accessory did not come

with the product or the accessory is damaged. It may be regulated under some

standard.

- For a cable with a core at only one end, connect the end with the core to the

projector. That may be required by EMI regulations.

- Neither disassemble nor modify the projector and the accessories.

- Do not use the damaged accessory. Be careful not to damage the accessories.

Route a cable so that it is neither stepped on nor pinched out.

WARNING

►Do not turn on or off the projector while connected to a device

in operation, unless that is directed in the manual of the device. Otherwise it may

cause malfunction in the device or projector.

►Be careful not to mistakenly connect a connector to a wrong port. Otherwise it

may cause malfunction in the device or projector.

- When connecting a connector to a port, make sure that the shape of the

connector fits the port.

- Tighten the screws to connect a connector equipped with screws to a port.

- Use the cables with straight plugs, not L-shaped ones, as the input ports of the

projector are recessed.

CAUTION

Connecting with your devices

(continued on next page)

Arrangement (continued)

• The projector may make a rattling sound when tilted, moved or

shaken, since a flap to control the air flow inside of the projector has moved. Be

aware that this is not a failure or malfunction.

NOTE

Содержание 8104HW











































































































Результаты поиска

Содержание 8104HW

Отзывы:

Похожие инструкции для 8104HW

Бренды по названию

Популярные бренды

Dukane 8104HW, Руководство пользователя

Результаты поиска

Содержание 8104HW

Отзывы:

Похожие инструкции для 8104HW

Бренды по названию

Популярные бренды