Dukane 68100WUSS-L Скачать руководство пользователя

Страница: 46 / 203

2. Projecting an Image (Basic Operation)

TIP: To obtain the best focus, perform the following (for permanent installation)

Preparation: Warm up the projector for one hour.

1. Press the FOCUS +/− buttons to check the adjustable focus range. For checking it by the remote control, press and hold the CTL

button and press VOL./FOCUS +/− button. If the projector in use is not within the adjustable focus range, move the projector back

and forth.

2. Select the [TEST PATTERN] from the menu and display the test pattern. (

→

page

)

• For displaying the test pattern by the remote control, press TEST button.

3. Keep pressing the FOCUS − button until the grid of the text pattern becomes invisible.

• The FOCUS adjustment bar displaying position can be shifted or be turned off temporarily. (

→

page

)

4. Keep pressing the FOCUS + button until you obtain the best focus.

For obtaining the best focus by the remote control, press the VOL./FOCUS + button while holding to press the CTL button.

If you adjust beyond the best focal point, go back to step 3 and repeat the procedures.

5. Turn the edge focus ring clockwise or counterclockwise to adjust the focus at the edges of the projected image.

Applicable lens unit: NP39ML

1. Focus on the projected image around the optical axis. (Powered focus)

The optical axis is at the bottom of the image.
Press the FOCUS +/− button until you can obtain the best FOCUS around the optical axis. (The FOCUS adjust-

ment bar will be displayed on.)

In another way, press the VOL/FOCUS +/− button while holding to press the CTL button on the remote control.

Optical axis

•

◀

▶

buttons on the cabinet or the remote control are also available to adjust FOCUS while the FOCUS adjust-

ment bar is displayed on.

Содержание 68100WUSS-L












































































































































































































Результаты поиска

Содержание 68100WUSS-L

Отзывы:

Похожие инструкции для 68100WUSS-L

Бренды по названию

Популярные бренды

Dukane 68100WUSS-L, Руководство пользователя

Результаты поиска

Содержание 68100WUSS-L

Отзывы:

Похожие инструкции для 68100WUSS-L

Бренды по названию

Популярные бренды