Congratulations on purchasing DUI ZipSeals and/or ZipGloves. Properly used they will make your diving more comfortable and enjoyable. DUI ZipSeals
and ZipGloves are intended for use by certified divers trained in the use of drysuits or individuals under the direct supervision of a qualified instructor.
This manual includes the installation and use of all versions of DUI ZipSeals and ZipGloves. It does not replace the DUI Drysuit Owners Manual. You can
obtain a copy of the DUI Drysuit Owners Manual by contacting DUI at 619.236.1203, toll free at 800.325.8439, e-mail [email protected]
or download from the DUI website at www.DUI-Online.com.
I n s t a l l i n g & U s i n g
D U I Z i p S e a l s
™
&
Z i p G l ove s
™
Improper use or misuse of ZipSeals/ZipGloves could result in suit flooding and loss of buoyancy control, including uncontrolled descents and
uncontrolled rapid ascents, resulting in drowning, decompression sickness, or air embolism.
Improper use or misuse of ZipSeals/ZipGloves could result in exposure to thermal hazards, including rapid body overheating (hyperthermia)
or cooling (hypothermia) resulting in stroke or seizure.
! ! WARNING ! !
Z i p S e a l s
™
WRIST
Installing Wrist ZipSeals
1.Your drysuit must be equipped
with ZipRings on the sleeves
2. Apply a small amount of soapy
water into the grooves on the wrist
ZipSeal (1 part mild dish soap to 10
parts water).
3. Invert the seal so you can get
your fingertips on the inside of the
ZipRing (this will help you press the
rings together)
4. Insert the entire ring of the
ZipSeal into the sleeve.
5. Line up the grooves on the wrist
ZipSeal with the grooves on the
sleeve. Press together.You should
feel the grooves “click” together.
6. Repeat the procedure on the
other sleeve.
Remember: ALWAYS double check
each ZipSeal before every dive to
ensure the grooves are securely
snapped together.
Removing Wrist ZipSeals
1.While holding onto the ring on
the sleeve, gently insert the tip of
your finger into the groove on the
ZipSeal.
2. Gently peel back the wrist
ZipSeal while pulling the ring on the
sleeve outward. Remove the rest of
the wrist ZipSeal from the sleeve.
3. Repeat on the other sleeve.
NECK
Installing a Neck ZipSeal
1.Your drysuit must be equipped
with a ZipRing on the neck.Turn the
suit inside out.
2. Spray a small amount of soapy
water into the grooves on both
sides of neck ZipSeal (1 part mild
dish soap to 10 parts water).
3. Pull the double ring on the
drysuit slightly apart
4. Completely insert the neck
ZipSeal into the ZipRing on the
drysuit and line up the grooves.
5. Press the grooves together with
your fingertips until you feel the
grooves “click” together.
Remember:There are two sides of the
drysuit neck ZipSeal and both sides
need to be locked in place.
6. After pressing them together run
your fingers around the neck
ZipSeal once more to ensure it is
secure on both sides of the neck
seal.
7.Turn the suit right side out before
diving.
Removing a Neck ZipSeal
Removing a neck ZipSeal can be
more difficult as it is locked
between two rings
1. Insert your fingertip between the
ZipRing on the neck seal and the
ZipRing on the drysuit.
(continued on reverse side)
Содержание ZipSeals
Страница 1: ......
