26
Chronograph reset
(incl. after replacing battery)
This procedure shoud be performed when the chronograph
second hand does not return to zero position.
Pull out the crown to position (3).
Press the button „A“ several times to set the chrono-
graph second hand to zero position.
Press the button „B“ once to set the chronograph 1/20
second hand to zero position. The chronograph hands
can be advanced rapidly by continuously pressing but-
ton „B“.
Once the hands are set at zero position, reset time and
return the crown to its normal position (1).
1.
2.
3.
4.
27
Time setting for watches with screw crown
(Models Imola and Nautica)
Unscrew crown by turning the crown counter-clockwise
(b) .
To set time, pull out crown to position (3) and turn
crown in either direction until hour/minute hands are
at the correct time.
Push crown into position (1) and lock the screw crown
by turning it clockwise (a) until it is tight.
Attention:
Please note that your watch is only water resistant if the
crown is properly screwed on!
1.
2.
3.
