Duevi EzyDriveCAM, Руководство по установке оборудования

Страница: 3 / 14

3
2. D
EVICE CONNECTION
Figure 1 – Electronic board of EzyMegaCAM
LAN
(connector side)
POWER SUPPLY
Can be in two different types. When using PoE, do NOT connect 12 V power supply!
12 V POWER SUPPLY
PoE
Power is supplied by LAN (if present a Power
over Ethernet system)
+12V GND
BAT
Backup battery
connector
LAN
LAN connector RJ45
type
Power supply 12 V
Power 12 V
Not necessary if using the PoE (LAN)
system
MASTER slot
Lower slot
Use ONLY this one
in case of single SD
card
SLAVE slot
Upper slot
DO NOT use in case
of single SD card
Double SD slot
To install up to
two SD cards
(must be
identical).
Insert/remove
only with device
completely
unpowered
Input/Output
Use provided cable