4.
Connections
+
Positive power supply
-
Negative power supply
A
Pole
“A” RS485 signal
B
Pole
“B” RS485 signal
See control panel manual for connection details.
5.
Keyboard programming
1.
Connect the keyboard to the control panel and connect
power supply (consult the control panel manual)
2.
Press the KEYBOARD SETUP icon for 3 seconds:
3.
The first item of the keyboard programming menu
appears on the display (DEFAULT IS ITALIAN).
Use the buttons
▼ and ▲ to move between options
Press
“
” to enter the displayed option
To edit a value:
•
Use the numeric keys or the keys
◄ and ►
•
Confirm changes with
“
”
•
Cancel changes with
“
”.
Options
Function
Default
Language Keyboard language selection
Values: Italiano, English, Francais,
Espanol, Deutsch
Italiano
Address
Keyboard address
Values: 1 ÷ 8
1
Acoustic
signal
Enable buzzer beeps
Values: ON / OFF
ON
Signal
tones
Select tone buzzer sounds
Values: 0 (severe) ÷ 9 (acute)
3
Siren
ringtone
Enable buzzer bell for panel alarm
Values: YES / NO
NO
! WARNING !
ENABLE only to perform a system test.
DISABLE in normal operation.
Time LCD
light
Set screen on time
Values: 0 ÷ 99 seconds
60 sec
Tamper
enable / disable the anti-opening
tamper
Values: YES / NO
SI
Tipo
centrale
Select panel model
Values: CE-1003, CE-LAN
CE-LAN
Erase all
Delete the programming and returns to the
factory setting
End
programm
Exit programming
4.
To exit programming, select "End Programming" and
press
“
”.
NOTE: The keypad automatically exits programming
if no key is pressed for 30 seconds.
6.
Keyboard display
At rest the screen is off. It lights up as soon as it is touched
or a new event occurs in the control panel. The screen
shows the status of the control panel and allows its control
(always refer to the control panel manual).
NOTICE: The icons may change according to the
control panel to which the keyboard is connected
(always refer to the control unit manual).
S1 ÷ S4
Arming and status keys
1 ÷ 9
Numeric keys
Change values or enter user and installer
codes
Alert
Hashtag
Panel Disarm / Sound
►◄▼▲
Direction keys
Move selection or change values
OK
Confirm and change values
Clear
Exit, delete or cancel
GSM Status
Panic Alarm
(long press for 3 seconds)
Silent alarm
(long press for 3 seconds)
Keyboard programming
(long press for 3 seconds)
Installer / User Menu (only CE100-3 panel)
(long press for 3 seconds)
7.
Technical data
Power supply
10 ÷ 14 V
(typical 12 V
)
Consumption
Stand-by 80 mA
– Max 150 mA
Temperature
0 ÷ 40 °C
TASTIERA
CENTRALE
TASTIERA
Program.Tastiera
Selez.Lingua
S1 S2 S3 S4
1 2 3 4
5 6 7 8
▲
TA STIERA
CENTRA LE
◄
►
▼
9 0
17:20 21/02/20
Disarmed
S1 S2 S3 S4
1 2 3 4
▲
TA STIERA
CENTRA LE
◄
►
5 6 7 8
▼
9 0
EU DECLARATION OF CONFORMITY
Hereby, DUEVI declares that the equipment type
“Wired Touch Screen Keypad”
mod. DV-TOUCH is in compliance with Directive EMC 2014/30/EU. The full text
of the EU Declaration of Conformity is available at the internet address
www.duevi.eu
