Duerkopp Adler 559, Инструкция по эксплуатации

Страница: 23 / 77

8.3 Adjusting the spreading
Caution: Danger of injury!
Exercise utmost caution when making adjustments with the
machine running.
Standard checking
The distance X between the clamping plates 2 and the fabric support
plate 1 should amount to 1.3 mm (non-spreaded) and to 0.3 mm
(spreaded).
–
Insert the clamping plates 2 and switch the machine on.
–
Press the keys “ P ” and “ F ” on the control panel simultaneously.
–
Enter code “2548”.
–
Press key ” OK ”.
The control switches to the technician level.
–
Select the menu “601” with the key “ + ”.
–
Switch the menu on with key ” OK ”.
–
Select the function “ Y03 ” (closing the fabric clamp).
–
Press key ” OK ”.
The fabric clamps close.
–
Check whether the distance X amounts to 1.3 mm.
–
Select the function “ Y04 ”.
–
Press key ” OK ”.
The fabric clamps spread.
–
Check whether the distance X amounts to 0.3 mm.
3
19
2 X 1 4