Duerkopp Adler 275, Инструкция по эксплуатации

Страница: 26 / 36

Automatically switching off the edge cutter at the seam-end
At the seam-end the edge cutter is automatically switched off when the thread is cut if
parameter 256 = 1. The edge cutter can also be switched on and off again at any time
by pressing the Y key.
Not automatically switching off the edge cutter at the seam-end
If parameter 256 = 0, the edge cutter is not automatically switched off at the seam-end.
It can only be switched on and off again by pressing the Y key.
6.17.2 Switching on the edge cutter with an automatic delay
If in each seam the edge cutter is to be switched on with a delay, i.e. after a certain
number of stitches, parameter 258 must contain this number of stitches. In this case the
edge cutter is switched on once that number of stitches has been sewn since the start of
the seam. Pressing the Y key during the stitch count switches the edge cutter on
immediately, the stitch count is terminated.
All other functions are as described in section 6.17.1.
6.17.3 Switching on the edge cutter manually
If the edge cutter is always to be switched on manually, never automatically, the number
of stitches in parameter 258 must be set to 0. The edge cutter can then be switched on
and off with the Y key at any time, even with the machine at a standstill.
All other functions are as described in section 6.17.1.
6.17.4 Switching off the edge cutter automatically, by stitch count
If the edge cutter is only to be switched on for a certain number of stitches, this number
can be entered in parameter 259. Counting begins when the edge cutter is switched on.
During the stitch count the edge cutter can immediately be switched off by pressing the
Y key, which terminates the stitch count.
24