Contatto
ModDMX
Correct disposal of the product (waste electrical & electronic
equipment)
(Applicable in the European Union and other
European countries with separate collection sys-
tems). This marking on the product, accessories or
documentation indicates that the product and its
electronic accessories should not be disposed of
with other household waste at the end of their work-
ing life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they pur-
chased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and check
the terms and conditions of the purchase contract. Adequate dis-
posal of the decommissioned equipment for recycling, treatment
and environmentally compatible disposal contributes in preventing
potentially negative effects on the environment and health and pro-
motes the reuse and/or recycling of equipment materials. Abusive
product disposal by the user is punishable by law with administrat-
ive sanctions.
Installation and use restrictions
Standards and regulations
The design and the setting up of electrical systems must be per-
formed according to the relevant standards, guidelines, specifica-
tions and regulations of the relevant country. The installation,
configuration and programming of the devices must be carried out
by trained personnel.
The installation and the wiring of the
Contatto
bus line and the re-
lated devices must be performed according to the recommenda-
tions of the manufacturers (reported on the specific data sheet of
the product) and according to the applicable standards.
All the relevant safety regulations, e.g. accident prevention regula-
tions, law on technical work equipment, must also be observed.
Safety instructions
Protect the unit against moisture, dirt and any kind of damage dur-
ing transport, storage and operation.
Do not operate the unit outside the specified technical data.
Never open the housing. If not otherwise specified, install in closed
housing (e.g. distribution cabinet).
Earth the unit at the terminals provided, if existing, for this purpose.
Do not obstruct cooling of the units.
Setting up
The physical address must be assigned with the specific program-
mer and the setting of parameters (if any) must be performed by
the specific configuration softwares; for more details refer to the
specific data sheet of the product. For the first installation of the
device, generally and unless otherwise specified on the specific
data sheet of the product, proceed according to the following
guidelines:
•
Check that any voltage supplying the plant has been removed
•
Assign the address to module (if any)
•
Install and wire the device according to the schematic dia-
grams on the specific data sheet of the product
•
Only then switch on the 230Vac supplying the bus power sup-
ply and the other related circuits
Applied standards
The devices belonging to
Contatto
line comply with the essential
requirements of the following directives:
2004/108/CE (EMC)
2006/95/CE (Low Voltage)
2002/95/CE (RoHS)
Note
Technical characteristics and this data sheet are subject to change
without notice.
DUEMMEGI
s.r.l. - Via Longhena, 4 - 20139 MILANO
Tel. 02/57300377 - Fax 02/55213686 –
www.duemmegi.it
Rel.: 2.2 December 2013
Page 7 of 7
HOME AND BUILDING AUTOMATION
