Installation and User Guide
Manual Soaps and Hand Sanitiser Dispensers
Page 3
Product Features
Brushed and lacquered dispensers are manufactured from Stainless Steel.
White units are constructed from steel and powder coated.
Internal mechanisms are constructed from mixed materials.
All units (see product groups) are bulk fill/top up and suitable for your choice of formulation but
always ensure the correct type is used i.e. liquid, foam or hand sanitiser.
All units are lockable to protect the contents and spare keys are available from Customer Services.
Soap dispensers are operated by pushing a button or the cover to dispense the soap, this is to
reduce the pressure on wall fixings to ensure they remain safe and secure.
Fixing kits are included with all units.
Installation
Following the guide for fixing; measure and mark the position of the fixing holes on the wall
ensuring that they are level.
Drill holes in the wall using the appropriate size drill bit. Drill to the depth of the wall plug. If the
surface is tiled, drill into the grout lines whenever possible. Insert the wall plugs supplied.
Open the dispenser, remove the reservoir if necessary and position the dispenser fixing holes over
the wall holes made.
Insert the screws provided and tighten to secure the dispenser. We always recommend that you use
all fixing holes available for strength and security.
Replace any internal mechanisms and close the cover.
Press the cover multiple times to ensure operation before filling with consumable.
70
46
50
150.
6
17
8
5.8
4
5.5
4
Example:
