18. Cleaning and storage
All materials for the harness were carefully selected, keeping their quality and durability in mind. With help of your care they will keep
your harness in good condition for a long time. The harness is best cleaned with a wet sponge, possibly a bit of soap. Do not use any
detergents nor solvents. If there is a lot of mud, before wet cleaning first use the brush.
In case of completely soaked harness (e.g. after water landing) dry it in a well aired place, away from direct sun operation.
Soaked back protector must be taken out of the harness and dried with its zip opened. If this will not be enough, remove the airfoam
and dry it separately.
Soaked rescue chute has to be always completely removed from the harness, dried and packed again by a licensed person.
Harness can be stored in a backpack, but if you want to give it best service – keep it de-rigged in a well-ventilated place, away of
sunlight. If the harness is not going to be used for a longer time, it is advised to get it out of the backpack. Unfortunately some
discoloration of individual harness parts is unavoidable over time and this is yet another reason for not exposing it to the sun more
than necessary.
Before packing the harness remove the stiffeners from air intakes of the self-inflating part and the upper area of the back pocket.
Open the cockpit and put the instrument panel inside.
37
Содержание POGO 3
